Question: I play a 48-inch shaft in my driver, but I’m thinking of adding a little end cap with my initials on it. But this would make the length of my driver over the 48-inch limit. Would this make my driver non-conforming?
Answer: First things first: endcap? Clubs are tools, not jewellery. No carpenter worth his salt puts an endcap on his Estwing E3-16C hammer. Moving on. As for shaft length, we’re not fans of 48-inch drivers, or, frankly, anything significantly longer than 45½ inches. Unless you’re an NBA player, a longer shaft might only make it more difficult to achieve centre-face contact. It’s also not necessarily true that a longer shaft will result in more clubhead speed that comes from creating a larger swing arc. Real distance comes from hitting the ball solidly, not just from speed, whose gains at best are marginal for golfers who aren’t competing in long-drive competitions.
To be fair, as drivers have become increasingly more stable, a longer (and lighter) shaft can help some players generate more speed, and making off-centre contact on a highly stable driver can be less of a negative. When off-centre hits start behaving more like on-centre hits, swinging for the fences becomes more enticing. Still, there is ample evidence that most players will not swing a super-long, super-light driver faster.
Back to your question. Yes, you can add an identification tag, even stick a tee or a ball retriever, into the butt end of your driver without violating the length rule. It’s covered in the rules under Part 1, 2a, which allows “exceptions… for attachments that do not affect the performance of the club” such as “temporary, non-permanent attachments to the butt end of the grip”. That doesn’t mean you can slap a shaft extender on the end of your original 46-inch driver and have it be OK under the rules. Shaft extenders clearly are used to enhance the performance of the shaft, but your ID tags wouldn’t be an overt attempt to skirt the rules.
Here’s another thing: if your clubs include stat-tracking sensors on the grip end, like Arccos or ShotScope, the extra length on those sensors won’t make your driver non-conforming either. They’re covered under that previously mentioned exception under the rules regarding length.
It’s also worth noting that for elite competitions, there’s an often-applied Model Local Rule that limits shaft length to 46 inches. The fact is, there are very few drivers these days that appear at retail even at this length, let alone beyond it. There’s a reason for that: very few drivers longer than 46 inches have made much of an impact in the marketplace.
As a golf-playing species, it seems we’ve found a maximum length that optimises our biomechanical range. In some cases, you can go outside the lines and still be within the rules, but tread lightly.
MORE EQUIPMENT QUESTIONS ANSWERED:
Is it OK to not tee the ball on a par 3?
Can a ‘draw’ driver overdo it on fixing your slice?
Matt Fitzpatrick was denied the chance to replace his driver. Was that the correct call?
High-lofted fairway woods have their place, but don’t I need a 3-wood for off the tee?
Can you use a shaft over and over again?
Is the shaft the engine of the golf club? Not really
Can I put my old driver shaft in my new driver?
Beware when shopping for new irons: All specs are not the same
How do I determine which golf ball is right for me?
7-woods are all the rage for good reason. Should the 9-wood be next?
